=============================== pytest-helper =============================== .. default-role:: code The pytest-helper package allows modules, both inside and outside of packages, to be made self-testing with `pytest `_ when the module itself is executed as a script. The test functions that are run can be located in the same module as the code being tested or they can be located in a module in a separate test directory. Standalone testing modules can also be easily set up so that they are self-testing with pytest when they are executed. Several additional utility functions are provided to make it easier to set up and run unit tests. For example, there is a function to simplify making modifications to the Python search path so that test modules will be discovered. One of the useful features of the package is that relative pathnames are always interpreted relative to the directory of the file in which they occur (i.e., not relative to the Python CWD which can vary depending on how the python interpreter is invoked). Two kinds of helper functions are provided. The first kind are intended to make it easier to run pytest on a test file or files, and the second kind are meant to be used in writing tests, inside test files. Some of the provided helper functions are general-purpose, but several are specific to the `pytest `_ testing framework. These helper functions are independent of each other and can be used (or not used) as desired. The functions are all compatible with the ordinary uses and invocations of pytest. .. _Introduction: Introduction ============ Testing is an important part of software development, especially for a dynamically-typed language like Python. The easier it is for people to set up and run tests, the more likely they are to write their tests as they code rather than waiting until later to do so (or perhaps not writing formal tests at all). When developing a Python module it is nice to be able to quickly run some tests specific to that module, without having to run all the tests for the full package. Using pytest-helper it is easy to make files self-testing whenever they are run as scripts. During development you can then just run the file, say from your editor or IDE, to see the test results. Below is a simple example to illustrate the idea. This is a Python module which is possibly part of a larger package. It contains its own test functions at the bottom. Whenever the module is run as a script the tests will be run with pytest; when the module is imported it runs normally. So as the module is being written or modified it can be executed to see the results of tests, and new tests can be added as you go along. .. code-block:: python import pytest_helper # # Run the tests, but only when the module is invoked as a script. # if __name__ == "__main__": # Guard conditional, optional but recommended. pytest_helper.script_run(self_test=True, pytest_args="-v") # # Regular imports and program code go here. # code_var = "foo" # # Test functions are below; they can easily be moved to a separate module. # pytest_helper.autoimport() # Do some basic imports automatically. def my_setup(): # Could be a pytest fixture instead of a regular function. setup_var = "bar" locals_to_globals() # Copies setup_var to the module's global namespace. def test_var_values(): my_setup() # Run the setup code. assert code_var == "foo" # Set in the regular code above. assert setup_var == "bar" # Copied to the global namespace. test_dict = {} with raises(KeyError): # Pytest function raises was autoimported. test_dict[5] There are more examples in the :ref:`Examples` section below. They include the case where the tests to be run are in separate test files and the case of making the separate test files themselves self-testing. It is easy to move tests originally written inside the module being tested to a separate test file. In order to simplify the functional interface, some of these helper functions use basic introspection look up the names of modules. Other functions use introspection to modify a module's global variables. Where introspection is used, a fallback is usually provided to do the task without introspection. (Some people might object to the use of introspection "magic," but the level used by these functions is less than what pytest itself does already.) Installation ============ The easiest way to install is to install from PyPI using pip: .. code-block:: bash pip install pytest-helper Alternately, you can download or clone the repository directory from `the pytest-helper GitHub pages `_ and then install using either `pip install .` or `python setup.py install` from the root directory (pip is preferred). In lieu of installing you can just add the `pytest_helper/src` subdirectory to your `PYTHONPATH` environment variable. Functions to help in running tests ================================== These are short descriptions of the functions which simplify the invocation of pytest on a given test file. The links go to the more-detailed functional interface descriptions. * :ref:`pytest_helper.script_run` The `script_run` function is used to actually invoke pytest on a test file or list of files. It takes a path or a list of paths and, when called from a script, will run pytest on all those files. The `script_run` function is useful because it allows Python modules to be easily made self-testing when they are run as scripts. When working on a module in, say, Vim you can invoke a command to run the current file as a script in order to verify that it still passes whatever tests are defined for it. Those tests can be in the same file and/or in other files. Test files themselves can similarly be made self-executing when run as a script, which can be useful when writing tests. One use of modules with self-contained tests, like in the example in the :ref:`Introduction`, is to quickly start writing a simple module while including a few tests. As (or if) the module continues to evolve it is easy to extract those tests into a separate test module at some point. If `script_run` is not called from a script's `__main__` module then it returns without doing anything. Any relative paths passed to the function are expanded relative to the directory of the module from which the `script_run` function is called. The example in the :ref:`Introduction` shows how to use `script_run` to run a self-test on a file. The line below shows how the `script_run` function would be used to run pytest, with the `-v` verbose argument, on a test file named `test/test_foobar.py`:: pytest_helper.script_run("test/test_foobar.py", pytest_args="-v") When the module that calls the above function is not run as a script the function call does nothing. If the pytest option `--pyargs` is used to include dotted Python package descriptors you should also use the `pyargs=True` option to `script_run`. Setting the pytest-helper argument automatically passes the argument to pytest. * :ref:`pytest_helper.sys_path` The function `sys_path` takes a directory path or a list of paths and inserts them into Python's `sys.path` list. This is often necessary in order for Python to find the imports in test files. A benefit of using this function is that relative paths are allowed, and all relative paths are expanded relative to the directory of the module which calls the function. This is in contrast to the default evaluation of relative paths in Python, which is relative to Python's current working directory (CWD). The CWD can vary depending on the particular command used to invoke the Python interpreter. Using relative imports within a project's directory structure makes it more portable. The line below shows how to use `sys_path` to add both the directory `../test` and the parent directory to Python's `sys.path`:: pytest_helper.sys_path("../test", add_parent=True) This line does the same thing as the line above:: pytest_helper.sys_path(["..", "../test"]) * :ref:`pytest_helper.init` Calling the `pytest_helper.init` function is optional, but sometimes it is useful. This function should be called directly after importing `pytest_helper`:: import pytest_helper pytest_helper.init() The main benefit of using an early `init` call is to make sure that the introspective lookup of the calling-module's path continues to work even if some intervening command or module import changes the Python CWD (which is rare, but it happens). This function can also be used to disable the use of configuration files (:ref:`see below`). Functions to help in writing tests ================================== These convenience functions are used to help in writing the tests themselves. They are good for quickly setting up tests. They can always be replaced by their more-conventional (non-magic) equivalents. * :ref:`pytest_helper.locals_to_globals` The `locals_to_globals` function is intended to be run from a fixture (i.e., from a test setup function) in the same module as the tests. It mimics the effect of declaring all the local variables in the setup function global in order to access them from the test functions that use the setup. By default it never overwrites an existing global variable unless that variable was set by a previous run of `locals_to_globals`. Can optionally clear any variables set on previous calls so that they do not accidentally affect the current tests. This function is usually called without arguments, near the end of a setup function or fixture. If `autoimport` is used then it is automatically imported into the module's global namespace. Note that some linters will complain about variables being used without being set. * :ref:`pytest_helper.clear_locals_from_globals` The `clear_locals_from_globals` function is called by `locals_to_globals` when `clear` is set true. This function can also be explicitly called to do the clearing. * :ref:`pytest_helper.autoimport` The `autoimport` function is a convenience function that automatically imports certain pytest-helper and pytest functions into the calling module's global namespace. The names can then be used essentially as builtins in the test code. By default an exception is raised if the imports shadow any existing variables. This function imports the `pytest` module as `pytest`. From pytest-helper it imports `locals_to_globals`, `clear_locals_from_globals`, and `unindent`. From pytest it imports `raises`, `fail`, `fixture`, `skip`, `xfail`, and `approx`. This function is usually called without arguments:: pytest_helper.autoimport() Note that some linters will complain about variables being used without being set. * :ref:`pytest_helper.unindent` The `unindent` function allows for cleaner formatting of multi-line strings, for example to compare with in a pytest assertion. The first argument, `unindent_level`, gives the number of characters to unindent. The second argument is the string (typically a triple-quote string). The string is split into lines, keeping all empty lines, and then the first and last line are discarded. Each line is then unindented by the `unindent_level` argument number of characters, and the lines are re-joined with newlines. An exception is raised on trying to unindent non-whitespace on a line or if there are fewer than two lines. Here is a simple example usage, comparing a parse result with an expression tree of tokens in a multi-line string. The assertion is assumed to be inside a pytest testing function, already indented four spaces. The parse result is assumed to start on the first column:: assert result_tree.tree_repr() == unindent(12, """ """) .. _Examples: Examples ======== The :ref:`Introduction` gives an example of a self-testing module, which contains both the code to be tested as well as pytest test functions for that code. Below are some examples of using the pytest-helper functions in other common cases. Whenever `script_run` is called from a module to run tests it is best to call it from the beginning of the file, especially for files inside packages which do intra-package imports. This placement is more efficient and avoids some potential headaches with imports. I like to put the import of pytest-helper and the call to `script_run` directly after any `__future__` import and before all the others, but it really just needs to be before any imports which use intra-package imports (since the module is being run as a script when `script_run` executes). Whenever `script_run` is called in the examples below the optional `if __name__ == "__main__"` guard conditional is used. It can be left off, but it is slightly more efficient to use it since without it the module's name has to be looked up by introspection to see if anything should be done. Using the conditional also makes the code more explicit in what it is doing. * **Running tests contained in separate test files and test directories.** This is an example of a module with its tests in separate test files and directories. When invoked as a script it the module will run all the tests in the subdirectory `test` and then run only the test file `test_var_set.py` in a sibling-level test directory called `test2`: .. code-block:: python # # Run the specified test files, but only when invoked as a script. # if __name__ == "__main__": import pytest_helper pytest_helper.script_run(["test", "../test2/test_var_set.py"], pytest_args="-v") # # Regular imports and program code from here to the end. # code_var = "foo" * **Using pytest-helper inside a separate test file.** In this example there is a separate file, containing only tests, which when run as a script executes pytest on itself. This file is assumed to be inside a test subdirectory, and imports the file `do_things.py` from its parent directory. That directory is added to Python's `sys.path` by a call to `sys_path` (the test directory is not in the package of the parent directory, since it is usually not recommended to have an `__init__.py` file in test directories). The test file below can still be run from other files with `script_run` or via the usual invocation of pytest from the command line. .. code-block:: python import pytest_helper # # Run the test file with pytest when invoked as a script. # if __name__ == "__main__": pytest_helper.script_run(self_test=True, pytest_args="-v") # # Put calls to these pytest_helper functions AFTER the script_run call. # pytest_helper.autoimport() # Do some basic imports automatically. pytest_helper.sys_path(add_parent=True) # pytest_helper.sys_path("..") # Does the same thing as the line above. # pytest_helper.sys_path([".."]) # Does the same as the two lines above. # # Test code below. # from do_things import * # Since we're testing this module, import all. @fixture def my_fixture(): fixture_var = "bar" locals_to_globals() # Copies fixture_var to the module's global namespace. def test_var(my_fixture): assert code_var == "foo" # Assumed to be set in do_things.py. assert fixture_var == "bar" # Now in the module's global namespace. test_dict = {} with raises(KeyError): test_dict[5] # The raises function was autoimported. def test_skipped(): skip() # The skip function was also autoimported. Notice from these examples that very little needs to be changed in order to extract a separate test module from the testing part of a module which initially contains its own tests (like in the first example, in the :ref:`Introduction`). You would basically do the following: 1. Copy the Python file to the test directory with a new name. 2. Delete the code from one file and delete the tests from the other. (Both still need to import pytest-helper if they use any of the helper functions.) 3. Add an import statement in the test file to import what it needs from the code file. If necessary, `sys_path` can be called in the test file so that it can find the module or package to import. 4. Change the pathname on the `script_run` call in the code file to point to the new test file. If desired, a self-testing `script_run` call can also be added to the test file. .. note:: In script-based Python (i.e., not using packages) it is common to run simple module tests at the end of a module, in an `if __name__ == "__main__":` conditional section. Here, though, `script_run` is calling another program (pytest) to extract and run the tests, and it must work inside packages which can have explicit relative imports. In this case it is better to call the `script_run` near the beginning of the module. (This is also more efficient than calling `script_run` at the end of the module since in the latter case the module's initialization code gets run twice.) .. _Configuration: Configuration files =================== Several of the pytest-helper functions have arguments which can be overridden by values in a configuration file. The file must be named `pytest_helper.ini`, and each module separately searches for and parses a file with that name The files are cached by filename, so each one is only read once. Config files are loaded per-module (since many different modules across different packages may import and use the pytest-helper functions). The search is conducted from the directory of the module up to the root directory, taking the first such file encountered. Locating and using config files can be disabled altogether by passing the argument `conf=False` to the `init` function:: import pytest_helper init(conf=False) Below is an example `pytest_helper.ini` configuration, which sets a value for all the options which are currently settable from the config file. These are only examples, not the default options. Any other sections of the file or other options are silently ignored. Most of the option names are constructed from the name of the pytest-helper function concatenated with the name of the parameter of the function which they override. .. code-block:: ini [pytest_helper] # A comment. script_run_pytest_args = "-v -s" # These override any pytest_args setting. script_run_extra_pytest_args = "-v -s" # Appended to pytest_args setting. autoimport_noclobber = False autoimport_skip = ["pytest", "locals_to_globals"] Package contents ================ .. toctree:: :maxdepth: 4 pytest_helper Indices and tables ================== * :ref:`genindex` * :ref:`modindex` * :ref:`search`